Call or Text 646-921-5221
646-921-5221
support@peakflowfitness.com
Mon–Fri 9AM–9PM ET
The right power rack attachments turn one rack into a full training station: lat pulldowns and rows, dips, landmine work, lever-arm presses and walkout-free heavy squats, all on the same frame. The catch is compatibility. Paradigm's X-Series options fit X-Series racks and All-In-One Trainers, not DSHR-Series units, and each rack page lists which options it accepts. This guide explains what every X-Series attachment does, gives its size and weight, and maps exactly which rack takes which option, so you can build a modular station in the right order.
X-Series attachments are add-ons built for Paradigm's X-Series racks and All-In-One Trainers. Nearly every option page states the same rule: compatible with X-Series Racks and All-In-One Trainers only, and not compatible with DSHR-Series units. The Vertical Leg Press and Multi-Grip Pull-Up Bar pages state compatibility with X-Series racks, and the Vertical Leg Press also needs a Smith machine bar.
The second rule matters just as much: the rack decides too. Each X-Series rack page lists its compatible options and the ones that will not fit. The X-HR half rack, X-PC power cage and X-MPPC multipurpose power cage share one list, the X-MPHR multipurpose half rack has a shorter list, and the X-HRFT2 2-sided half rack and functional trainer has its own. Always check both pages: the attachment's and the rack's.
If you have not picked a rack yet, read our half rack vs power cage guide first. The attachments you want are one of the best reasons to choose one rack over another.
The X-Series Hi-Lo Pulley mounts a lat pulldown and low row station directly onto a compatible rack, so you do not need a separate cable machine. It comes with a lat bar and a short bar, has a large foot plate for bracing on seated rows, and has a product weight of 66 lb. Plan your space for it: it extends the frame about 16 in (40 cm) off the back.
From a training point of view, this is the attachment I would add first for most home lifters. A rack on its own is great for squats, presses and pull-ups, but vertical pulls with adjustable load and horizontal rows are hard to program without cables. The Hi-Lo lets someone who cannot yet do a strict pull-up build the pattern with lat pulldowns, and it gives everyone a back exercise that balances all the pressing.
The X-Series Lat Pulldown Seat gives a proper seated pulldown position with a knee support that adjusts across 6 heights and high-resilience polyurethane foam pads. It weighs 22 lb. Check the rack page carefully for this one: the X-HR, X-PC, X-MPPC and X-MPHR pages list the Lat Pulldown Seat as not compatible, while the X-HRFT2 page lists it as compatible. DSHR-Series trainers use a separate seat, the DSHR Lat Pulldown Seat, which is not compatible with X-Series units.
The X-Series Dip Station adds dips without a separate stand on the floor. It secures to the upright with dual locking pins, has knurled handles, measures 26 x 25 x 8 in and weighs 12 lb, so it goes on and off quickly between sets. Dips load the chest, shoulders and triceps hard; if they bother your shoulders, keep the depth to a range you control and build up gradually.
The X-Series Multi-Grip Pull-Up Bar adds narrow, neutral and angled grip positions to compatible X-Series racks and weighs 13 lb. Rotating grips across a training week is a simple way to keep pulling volume high while spreading the stress across the elbows and shoulders. For beginners, I recommend starting with the neutral grip.
The X-Series Monolift removes the walkout on squats and bench press. Once the bar leaves the hooks, they move out of the way automatically as you begin the lift, so you lift from the spot where you unracked. It has protective lining for the bar, measures 25 x 17 x 3 in and weighs 35 lb. This is a specialist tool for heavy squat singles and doubles, where a long walkout costs energy and position; most people training in moderate rep ranges can skip it.
The X-Series Landmine fits onto the rack with peg-hole mounting, measures 10 x 6 x 4 in and weighs 6.5 lb. Slide a barbell sleeve in and you can train landmine presses, rows, rotations and squats. The arcing path is friendly to shoulders that do not tolerate straight overhead pressing, and rotational work is something most home programs miss. Note that the X-HR half rack already has a landmine built in.
The X-Series Lever Arms give the rack an arcing movement path a straight barbell cannot, with multiple adjustments for pressing, rowing and other plate-loaded movements. The assembly measures 47 x 72 x 7.5 in and weighs 60 lb. Lever arms are useful for unilateral pressing and rowing, and for lifters who want a machine-like feel without buying more machines.
The X-Series Vertical Leg Press fits onto the Smith machine bar of a compatible X-Series rack and has a 52 x 40 in platform. You lie on the platform and press the loaded Smith bar upward. Because it needs a Smith machine, none of the half racks or cages in this guide can use it, and each of their pages lists it as not compatible. The X-Series model with a Smith machine is the X-TS PRO all-in-one trainer, which has a counter-balanced Smith machine; its page does not list this option, so confirm the pairing with our team before ordering.
The X-Series Safety Spotters come as a pair, measure 20 x 8 x 3.5 in each, weigh 16 lb and have protective lining. The X-Series J-Cups also come as a pair, measure 8 x 8 x 3.5 in, weigh 11 lb and are lined where the bar lands. Every X-Series rack in this guide already includes J-cups and safety spotters, so these are for a second set (for example, one pair at squat height and one at bench height) or replacements.
The X-Series Support Feet are a pair of feet that add support at the base of the frame, with peg holes for hanging accessories. Each foot measures 19 x 9 x 3 in, and the pair weighs 16 lb. The X-Series Connector bridges two X-Series racks with a 63 in pull-up bar (63 x 9 x 6.5 in, 31 lb), turning the space between them into usable training space for pull-ups or suspension straps.
This chart is built from each rack's own product page. "Yes" means the rack page lists the option as compatible; "No" means it lists it as not compatible.
| Attachment | Size and weight | X-HR | X-PC | X-MPPC | X-MPHR | X-HRFT2 |
|---|---|---|---|---|---|---|
| Hi-Lo Pulley | Adds about 16 in off the back; 66 lb | Yes | Yes | Yes | No | No |
| Lat Pulldown Seat | 6 knee heights; 22 lb | No | No | No | No | Yes |
| Dip Station | 26 x 25 x 8 in; 12 lb | Yes | Yes | Yes | Yes | Yes |
| Monolift | 25 x 17 x 3 in; 35 lb | Yes | Yes | Yes | Yes | Yes |
| Lever Arms | 47 x 72 x 7.5 in; 60 lb | Yes | Yes | Yes | Yes | Yes |
| Landmine | 10 x 6 x 4 in; 6.5 lb | Yes | Yes | Yes | Yes | Yes |
| Vertical Leg Press | 52 x 40 in platform | No | No | No | No | No |
| Support Feet (pair) | 19 x 9 x 3 in each; 16 lb | Yes | Yes | Yes | No | Yes |
| J-Cups (pair) | 8 x 8 x 3.5 in; 11 lb | Yes | Yes | Yes | Yes | Yes |
| Safety Spotters (pair) | 20 x 8 x 3.5 in; 16 lb | Yes | Yes | Yes | Yes | Yes |
| Connector | 63 x 9 x 6.5 in; 31 lb | Yes | Yes | Yes | Yes | Yes |
| Multi-Grip Pull-Up Bar | Narrow, neutral, angled grips; 13 lb | Yes | Yes | Yes | No | Yes |
Buy attachments in the order your training needs them, not all at once. Start with the rack itself; the X-Series racks already include J-cups and safety spotters, so you can squat, press and bench safely on day one.
Next, fill the biggest gap in your program. For most people that is pulling, so a Hi-Lo Pulley on a rack that accepts it (X-HR, X-PC or X-MPPC) is the strongest second purchase. If you can already do strict pull-ups, the Multi-Grip Pull-Up Bar and Dip Station give a lot of training for very little weight on the rack.
After that, add for your goal. Athletes and anyone who wants more rotational and single-arm work should add the Landmine (unless the rack already has one, as the X-HR does). Lifters chasing heavy squats and bench should look at the Monolift. Lifters who want machine-style pressing and rowing should look at the Lever Arms. If two racks share a room, the Connector turns the gap between them into a pull-up station.
Large racks and machines ship by freight to the lower 48 states and DC, calculated at checkout by weight. Smaller items ship free on orders over $999 (certain exclusions apply).
See every option in our rack attachments collection, and compare base racks in our power racks and squat racks collection or the full Paradigm Fitness collection.
No. The X-Series option pages state they are compatible with X-Series Racks and All-In-One Trainers only and not compatible with DSHR-Series units. DSHR trainers have their own options, such as the DSHR Lat Pulldown Seat.
The X-HR, X-PC and X-MPPC rack pages list the Hi-Lo Pulley as compatible. The X-MPHR and X-HRFT2 pages list it as not compatible.
No. It fits onto a Smith machine bar, and the X-HR, X-PC, X-MPPC, X-MPHR and X-HRFT2 pages all list it as not compatible.
Not to get started. The X-Series racks in this guide include J-cups and safety spotters. The separate pairs are for a second set or replacements.
It extends the frame about 16 in (40 cm) off the back of compatible racks, so add that to your floor plan.
Related reading: Half Rack vs Power Cage · Power Rack vs Squat Rack · Functional Trainer Buying Guide
About the author: Jacky Chan is a certified personal trainer and stretch therapist and the founder of Peak Flow Fitness.